Chemistry, Physics and Technology of Surface

ISSN 2518-1238 (Online), ISSN 2079-1704 (Print)

Natural fibre reinforced polymer composites nowadays are considered to be attractive cheap, safe and eco-friendly materials. The main problem of such composites related to the hydrophilicity of plant fibres may be successfully solved by chemical modification of their surface. However, some characteristics of the materials may be suppressed after this procedure. Therefore, the aim of the research is to find out the impact of chemical modification of filler on thermooxidative stability, tensile and flexural strength, as well as on biodegradability of polymer composites. The novelty of this work is in the examining new materials on the basis of Si-containing epoxyurethanes and chemically treated hemp woody core (HWC). Woody core that is the side product of hemp industry requiring its apropriate utilization was exposed to mercerization with sodium hydroxide solution and to further functionalization with epoxidized soybean oil (ESO) or 3-aminopropyltriethoxysilane (APS). Raw and surface treated HWC was used as reinforcement for two types of organic-inorganic epoxyurethane matrices made from sodium silicate, polyurethane prepolymer based on polyisocyanate and castor oil, and either diglycidyl ether of bisphenol-A (DGEBA) or ESO as epoxy component.

Functionalization of HWC led to better mechanical properties of composites. Compared to the corresponding materials including untreated filler, maximum increase in flexural strength (26 %) was observed for the samples with ESO-containing epoxyurethane and silanized HWC, while maximum increase in tensile strength (53 %) was revealed for the ones with DGEBA-containing epoxyurethane and oil treated HWC. Thermooxidative stability was also higher for composites reinforced with functionalized HWC. The specimens with APS-treated HWC performed the best at thermal decomposition. The values of their T_50% were up to 68 °C more than those for composites with unmodified filler. At the same time, the samples based on APS- or ESO-treated HWC were the most resistant to biodegradation, which may be concluded from their smallest weight loss during soil burial test.

1. Mohanty A.K., Misra M., Drzal L.T. Surface modifications of natural fibers and performance of the resulting biocomposites: an overview. Compos. Interfaces. 2001. 8(5): 313. https://doi.org/10.1163/156855401753255422

2. Monteiro S.N., Calado V., Rodriguez R.J.S., Margem F.M. Thermogravimetric behavior of natural fibers reinforced polymer composites - An overview. Mater. Sci. Eng. A. 2012. 557: 17. https://doi.org/10.1016/j.msea.2012.05.109

3. Mochane M.J., Mokhena T.C., Mokhothu T.H., Mtibe A., Sadiku E.R., Ray S.S., Ibrahim I.D., Daramola O.O. Recent progress on natural fiber hybrid composites for advanced applications: A review. eXPRESS Polym. Lett. 2019. 13(2): 159. https://doi.org/10.3144/expresspolymlett.2019.15

4. Luo H., Zhang C., Xiong G., Wan Y. Effects of alkali and alkali/silane treatments of corn fibers on mechanical and thermal properties of its composites with polylactic acid. Polym. Compos. 2016. 37(12): 3499. https://doi.org/10.1002/pc.23549

5. Valadez-Gonzalez A., Cervantes-Uc J.M., Olayo R., Herrera-Franco P.J. Chemical modification of heneque'n fibers with an organosilane coupling agent. Composites, Part B. 1999. 30(3): 321. https://doi.org/10.1016/S1359-8368(98)00055-9

6. Oh J.T., Hong J.H., Ahn Y., Kim H. Reliability improvement of hemp based bio-composite by surface modification. Fibers Polym. 2012. 13(6): 735. https://doi.org/10.1007/s12221-012-0735-2

7. Oushabi A., Hassani F.O., Abboud Y., Sair S., Tanane O., El Bouari A. Improvement of the interface bonding between date palm fibers and polymeric matrices using alkali-silane treatments. Int. J. Ind. Chem. 2018. 9(10): 335. https://doi.org/10.1007/s40090-018-0162-3

8. Rajesh G., Prasad A.V.R., Gupta A.V.S.S.K.S. Mechanical and degradation properties of successive alkali treated completely biodegradable sisal fiber reinforced poly lactic acid composites. J. Reinf. Plast. Compos. 2015. 34(12): 951. https://doi.org/10.1177/0731684415584784

9. Karthika M., Shaji N., Johnson A., Santhosh N.M., Gopakumar D.A., Thomas S. Biodegradation of composite materials. In: Bio monomers for green polymeric composite materials. (NY: John Wiley & Sons, Ltd., 2019). https://doi.org/10.1002/9781119301714.ch7

10. Azwa Z.N., Yousif B.F., Manalo A.C., Karunasena W. A review on the degradability of polymeric composites based on natural fibres. Mater. Des. 2013. 47: 424. https://doi.org/10.1016/j.matdes.2012.11.025

11. Mohanty A.K., Misra M., Drzal L.T. Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world. Journal of Environmental Polymer Degradation. 2002. 10(1/2): 19.

12. Zhang K., Wang F., Liang W., Wang Z., Duan Z., Yang B. Thermal and mechanical properties of bamboo fiber reinforced epoxy composites. Polymers. 2018. 10(6): 608. https://doi.org/10.3390/polym10060608

13. Le Moigne N., Otazaghine B., Corn S., Angellier-Coussy H., Bergeret A. Modification of the interface/interphase in natural fibre reinforced composites: Treatments and processes. In: Surfaces and Interfaces in Natural Fibre Reinforced Composites: Fundamentals, Modifications and Characterization. (Cham: Springer Cham, 2018). https://doi.org/10.1007/978-3-319-71410-3

14. Lu T., Jiang M., Jiang Z., Hui D., Wang Z., Zhou Z. Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites. Composites, Part B. 2013. 51: 28. https://doi.org/10.1016/j.compositesb.2013.02.031

15. Abdelmouleh M., Boufi S., Belgacem M.N., Duarte A.P., Ben Salah A., Gandini A. Modification of cellulose fibers with functionalized silanes: effect of the fiber treatment on the mechanical performances of cellulose-thermoset composites. J. Appl. Polym. Sci. 2005. 98(3): 974. https://doi.org/10.1002/app.22133

16. Zhu J., Brington J., Zhu H., Abhyankar H. Effect of alkali, esterification and silane surface treatments on properties of flax fibers. J. Sci. Res. Rep. 2015. 4(1): 1. https://doi.org/10.9734/JSRR/2015/12347

17. Członka S., Stra˛kowska A., Kairyte A. The impact of hemp shives impregnated with selected plant oils on mechanical, thermal, and insulating properties of polyurethane composite foams. Materials. 2020. 13(21): 4709. https://doi.org/10.3390/ma13214709

18. Rachini A., Le Troedec M., Peyratout C., Smith A. Chemical modification of hemp fibers by silane coupling agents. J. Appl. Polym. Sci. 2012. 123(1): 601. https://doi.org/10.1002/app.34530

19. Singha A.S., Rana A.K. Effect of silane treatment on physicochemical properties of lignocellulosic C. indica fiber. J. Appl. Polym. Sci. 2012. 124(3): 2473. https://doi.org/10.1002/app.35256

20. Stevulova N., Estokova A., Cigasova J., Schwarzova I., Kacik F., Geffert A. Thermal degradation of natural and treated hemp hurds under air and nitrogen atmosphere. J. Therm. Anal. Calorim. 2017. 128(3): 1649. https://doi.org/10.1007/s10973-016-6044-z

21. Cuinat-Guerraz N., Dumont M.-J., Hubert P. Environmental resistance of flax/bio-based epoxy and flax/polyurethane composites manufactured by resin transfer moulding. Composites, Part A. 2016. 88: 140. https://doi.org/10.1016/j.compositesa.2016.05.018

22. Faria D.L., Júnior L.M., de Almeida Mesquita R.G, Júnior M.G., Pires N.J., Mendes L.M., Junior J.B.G. Production of castor oil-based polyurethane resin composites reinforced with coconut husk fibres. J. Polym. Res. 2020. 27: 249. https://doi.org/10.1007/s10965-020-02238-7

23. Godara S.S. Effect of chemical modification of fiber surface on natural fiber composites: a review. Mater. Today: Proc. 2019. 18(7): 3428. https://doi.org/10.1016/j.matpr.2019.07.270

24. Liu Y., Xie J., Wu N., Wang L., Ma Y., Tong J. Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites. Tribol. Int. 2019. 131: 398. https://doi.org/10.1016/j.triboint.2018.11.004

25. Khan A., Huq T., Saha M., Khan R.A., Khan M.A. Surface modification of calcium alginate fibers with silane and methyl methacrylate monomers. J. Reinf. Plast. Compos. 2010. 29(20): 3125. https://doi.org/10.1177/0731684410367534

26. Yashchenko L.M., Yarova N.V., Vorontsova L.O., Brovko O.O. Physical-mechanical properties of polymer composites reinforced with hemp wood core. Voprosy khimii i khimicheskoi tekhnologi. 2020. 5: 104. [in Ukrainian]. https://doi.org/10.32434/0321-4095-2020-132-5-104-111

27. Broido A. A simple, sensitive graphical method of treating thermogravimetric analysis data. J. Polym. Sci. A2. 1969. 7(10): 1761. https://doi.org/10.1002/pol.1969.160071012

28. Chimeni D.Y., Toupe J.L., Rodrigue C.D.D. Effect of hemp surface modification on the morphological and tensile properties of linear medium density polyethylene (LMDPE) composites. Compos. Interface. 2016. 23(5): 405. https://doi.org/10.1080/09276440.2016.1144163 

29. Gorbach L.A., Babkina N.V., Purikova O.G., Barantsova A.V., GrischenkoV.K., Brovko O.O. Physico-mechanical and viscoelastic properties of polymer compositions based on synthetic oligomer ED-20 and epoxidized soybean oil. Polymer J. 2021. 43(2): 95. [in Ukrainian]. https://doi.org/10.15407/polymerj.43.02.095

30. Yashchenko L.M., Yarova N.V., Samoilenko T.F., Brovko O.O. Bioepoxide matrices of anhydride curing for structure composites. Ukr. Chem. J. 2018. 84(11): 51. [in Ukrainian].

31. Chee S.S., Jawaid M., Sultan M.T.H., Alothman O.Y., Abdullah L.C. Accelerated weathering and soil burial effects on colour, biodegradability and thermal properties of bamboo/kenaf/epoxy hybrid composites. Polym. Test. 2019. 79: 106054. https://doi.org/10.1016/j.polymertesting.2019.106054

32. Ramamoorthy S.K., Skrifvars M., Rissanen M. Effect of alkali and silane surface treatments on regenerated cellulose fibre type (Lyocell) intended for composites. Cellulose. 2015. 22(1): 637. https://doi.org/10.1007/s10570-014-0526-6

33. Nageswara A., Sudher P., Brahman V. Micro silica effects on thermal and mechanical properties of silica-epoxy composites. J. Polym. Mater. 2010. 27(1): 87.

34. Yashchenko L.N., Todosiychuk T.T., Zapunnaya K.V., Krivchenko G.N., Thermal properties of modified epoxyurethanes. Polim. Zhurnal. 2007. 29(4): 253. [in Russian].

35. Oza S., Ning H., Ferguson I., Lu N. Effect of surface treatment on thermal stability of the hemp-PLA composites: Correlation of activation energy with thermal degradation. Composites, Part B. 2014. 67: 227. https://doi.org/10.1016/j.compositesb.2014.06.033

36. Nakajima-Kambe T., Shigeno-Akutsu Y., Nomura N., Onuma F., Nakahara T. Microbial degradation of polyurethane, polyester polyurethanes and polyether polyurethanes. Appl. Microbiol. Biot. 1999. 51(2): 134. https://doi.org/10.1007/s002530051373

37. Batista K.C., Silva D.A.K., Coelho L.A.F., Pezzin S.H., Pezzin A.P.T. Soil biodegradation of PHBV/peach palm particles biocomposites. J. Polymer. Environ. 2010. 18: 346. https://doi.org/10.1007/s10924-010-0238-4

38. Pang A.L., Arsad A., Ahmadipour M., Ismail H., Bakar A.A. Effect of soil burial on silane treated and untreated kenaf fiber filled linear low-density polyethylene/polyvinyl alcohol composites. BioResources. 2020. 15(4): 8648. https://doi.org/10.15376/biores.15.4.8648-8661

39. Jacob M., Thomas S., Varughese K.T. Biodegradability and aging studies of hybrid biofiber reinforced natural rubber biocomposites. J. Biobased Mater. Bioenergy. 2007. 1(1): 118. https://doi.org/10.1166/jbmb.2007.013