Email the author Effects of particulate morphology, texture, and surface structures of various sorbents on bound water characteristics at low temperatures
DOI: https://doi.org/10.15407/hftp15.04.441
Abstract
The temperature and interfacial behaviors of water bound to various sorbents (silicas, carbons, polymers, etc.) are of interest from both theoretical and practical points of view because a certain amount of water could be always adsorbed from air and can affect the material properties, especially at low temperatures due to possible frost damage. These behaviors could be studied using low-temperature 1H NMR spectroscopy of static samples. The particulate morphology and texture of sorbents were characterized using microscopic and nitrogen adsorption methods. The study well demonstrates the influence of various factors including the morphology, texture, and surface structure of sorbents on the temperature and interfacial behaviors of bound water in the amounts smaller than the pore volume of sorbents. Upon volume infilling of pores by water, the textural and morphological effects (leading to the freezing/melting point depression) could be stronger than the effect of the surface structure (leading to the reorganization of bound water), because only one-two adsorption layers are well sensitive to the surface structure (polar or nonpolar surface functionalities). Therefore, changes in the relative amounts of unfrozen water Cuw(T)/C280K vs. temperature (at 200 K < T < 273 K) are similar for very different sorbents such as nanosilica, nano/mesoporous silica gel, and activated carbon (at close water amounts in the hydration range of h = 0.04–0.06 g/g) in contrast to that for microcrystalline cellulose. There are strong effects caused by the bound water amounts that are better observed for sorbents with a great contribution of nanopores, e.g., activated carbon AC–86 possessing very high specific surface area due to significant nanoporosity. A nonmonotonic effect of the amounts of water bound to AC–86 could be explained by nonuniform distribution of O-containing functionalities (mainly located at the edges of carbon sheets at the entrances into slitshaped hydrophobic nanopores). The clustered adsorption of water around these functionalities inhibits penetration of water into nanopores (formed by hydrophobic basal planes) especially at small amounts of water. An increase in the water content causes more intensive diffusion of the water molecules into narrower but less hydrophilic pores of AC–86 that results in enhanced freezing/melting point depression. The obtained results are of interest from a practical point of view since very different and practically important sorbents were analyzed in parallel at low temperatures upon various wetting.
Keywords
Full Text:
References
1. Iler R.K. The Chemistry of Silica. Solubility, Polymerization, Colloid and Surface Properties, and Biochemistry. (Chichester: Wiley, 1979).
2. Bergna H.E., Roberts W.O. Colloidal Silica: Fundamentals and Applications. (Boca Raton: CRC Press, 2006). https://doi.org/10.1201/9781420028706
3. Somasundaran P. Encyclopedia of Surface and Colloid Science. Third Edition. (Boca Raton: CRC Press, 2015).mhttps://doi.org/10.1081/E-ESCS3
4. Chaplin M. Water structure and science. http://www1.lsbu.ac.uk/water/, accessed on 2 October, 2023.
5. Kimmich R. NMR Tomography, Diffusometry, Relaxometry. (Heidelberg: Springer, 1997).
6. Petrov O.V., Furó I. NMR cryoporometry: Principles, applications and potential. Prog. Nucl. Magn. Reson. Spectrosc. 2009. 54(2): 97. https://doi.org/10.1016/j.pnmrs.2008.06.001
7. Mitchell J., Webber J.B.W., Strange J.H. Nuclear magnetic resonance cryoporometry. Phys. Rep. 2008. 461(1): 1. https://doi.org/10.1016/j.physrep.2008.02.001
8. Strange J.H., Rahman M., Smith E.G. Characterization of porous solids by NMR. Phys. Rev. Lett. 1993. 71(21): 3589. https://doi.org/10.1103/PhysRevLett.71.3589
9. Babick F. Suspensions of Colloidal Particles and Aggregates. (Berlin: Springer, 2018).
10. Koduru J.R., Karri R.R., Mubarak N.M., Bandala E.R. Sustainable Nanotechnology for Environmental Remediation. (Amsterdam: Elsevier, 2022).
11. Gun'ko V.M., Turov V.V. Nuclear Magnetic Resonance Studies of Interfacial Phenomena. (Boca Raton: CRC Press, 2013). https://doi.org/10.1201/b14202
12. Gun'ko V.M., Turov V.V., Zarko V.I., Goncharuk E.V., Gerashchenko I.I., Turova A.A., Mironyuk I.F., Leboda R., Skubiszewska-Zięba J., Janusz W. Comparative characterization of polymethylsiloxane hydrogel and silylated fumed silica and silica gel. J. Colloid Interface Sci. 2007. 308(1): 142. https://doi.org/10.1016/j.jcis.2006.12.053
13. Gun'ko V.M., Turov V.V., Goncharuk O.V., Pakhlov E.M., Matkovsky O.K. Interfacial phenomena at a surface of individual and complex fumed nanooxides. Surface. 2019. 11(26): 3. https://doi.org/10.15407/Surface.2019.11.003
14. Ullmann's Encyclopedia of Industrial Chemistry. Cryogenic Technology. (Weinheim: Wiley-VCH, 2007).
15. Kirk-Othmer Encyclopedia of Chemical Technology. V. 1, 13, 22, and 26. (John Wiley & Sons, Inc. 2001).
16. Bhushan B. Encyclopedia of Nanotechnology. (Dordrecht: Springer, 2012). P. 3917. https://doi.org/10.1007/978-90-481-9751-4
17. Basic characteristics of Aerosil fumed silica. (4th ed.) Tech. Bull. Fine Particles 11. (Hanau: Evonik Industries, 2014).
18. Legrand A.P. The Surface Properties of Silicas. (New York: Wiley, 1998).
19. Adamson A.W., Gast A.P. Physical Chemistry of Surface. 6th edition. (New York: Wiley, 1997).
20. Gregg S.J., Sing K.S.W. Adsorption, Surface Area and Porosity. 2nd ed. (London: Academic Press, 1982).
21. Kulkarni P., Baron P.A., Willeke K. Aerosol Measurement: Principles, Techniques, and Applications. Third Edition. (New York: John Wiley & Sons, 2011). https://doi.org/10.1002/9781118001684
22. Büchel K.H., Moretto H.-H., Woditsch P. Industrial Inorganic Chemistry. (Weinheim: Wiley-VCH, 2000). https://doi.org/10.1002/9783527613328
23. Xu R., Yan Xu Y. Modern Inorganic Synthetic Chemistry. (Elsevier: Amsterdam, 2017).
24. Radoor S., Karayil J., Jayakumar A., Kandel D.R., Kim J.T., Siengchin S., Lee J. Recent advances in cellulose- and alginate-based hydrogels for water and wastewater treatment: A review. Carbohydr. Polym. 2024. 323: 121339. https://doi.org/10.1016/j.carbpol.2023.121339
25. Cousins S.K., Brown M.B. Cellulose in microfibril assembly: computational molecular mechanics energy analysis favours bonding by Van der Waals forces as the initial step in crystallization. Polymer. 1995. 36(20): 3885. https://doi.org/10.1016/0032-3861(95)99782-P
26. Hatakeyama H., Hatakeyama T. Interaction between water and hydrophobic polymers. Termochem. Acta. 1998. 308(1-2): 3. https://doi.org/10.1016/S0040-6031(97)00325-0
27. Hatakeyama T., Nakamura K., Hatakeyama H. Determination of bound water content in рolymers by DTA, DSC and TG. Termochem. Acta. 1988. 123: 153. https://doi.org/10.1016/0040-6031(88)80018-2
28. Heiner A.P., Teleman O. Interaction between monoclinic crystalline cellulose and water: breakdown of the odd/even duplicity. Langmuir. 1997. 13(3): 513.
https://doi.org/10.1021/la960886d
29. Turov V.V., Gun'ko V.M., Barvinchenko V.N., Rugal A.A., Turova A.A., Fedyanina V.V. Hydration of cellulose with the presence of quercetin and organic solvents. Chemistry, Physics, and Technology of Surface. 2009. 15: 169.
30. Ahuja S. (Editor). Separation Science and Technology. V. 15. (Amsterdam: Elsevier, 2022).
31. Ngu L.H. Carbon Capture Technologies. (Amsterdam: Elsevier, 2022).
32. Yang R.T. Adsorbents: Fundamentals and Applications. (New York: Wiley, 2003). https://doi.org/10.1002/047144409X
33. Lu K. Nanoparticulate Materials. Synthesis, Characterization, and Processing. (Hoboken, New Jersey: John Wiley & Sons, Inc., 2013).
34. Moreno-Piraján J.C., Giraldo-Gutierrez L., Gómez-Granados F. Porous Materials Theory and Its Application for Environmental Remediation. (Cham: Springer Nature, 2021). https://doi.org/10.1007/978-3-030-65991-2
35. Rousseau R.W. Handbook of Separation Process Technology. (New York: John Wiley & Sons, 1987).
36. Gun'ko V.M., Turov V.V., Pakhlov E.M., Krupska T.V., Charmas B. Effect of water content on the characteristics of hydro-compacted nanosilica. Appl. Surf. Sci. 2018. 459: 171. https://doi.org/10.1016/j.apsusc.2018.07.213
37. Blitz I.P., Blitz J.P., Gun'ko V.M., Sheeran D.J. Functionalized silicas: structural characteristics and adsorption of Cu(II) and Pb(II). Colloids Surf. A. 2007. 307(1-3): 83. https://doi.org/10.1016/j.colsurfa.2007.05.016
38. Gun'ko V.M., Turov V.V., Turov A.V., Zarko V.I., Gerda V.I., Yanishpolskii V.V., Berezovska I.S., Tertykh V.A. Behaviour of pure water and water mixture with benzene or chloroform adsorbed onto ordered mesoporous silicas. Cent. Eur. J. Chem. 2007. 5: 420. https://doi.org/10.2478/s11532-007-0010-3
39. Gun'ko V.M. Morphological and textural features of various materials composed of porous or nonporous nanoparticles differently packed in secondary structures. Appl. Surf. Sci. 2021. 569: 151117. https://doi.org/10.1016/j.apsusc.2021.151117
40. Bansal R.C., Donnet J.B., Stoeckli F. Active Carbon. (New York: Marcel Dekker, 1988).
41. McEnaney B., Mays T.J., Rodriguez-Reinoso F. (editors). Fundamental Aspects of Active Carbons. Special issue. Carbon. 1998. 36(10).
42. Cooney D.O. Activated Charcoal in Medical Applications. (New York: Marcel Dekker, 1995). https://doi.org/10.1201/9780367803964
43. Rodriguez-Reinoso F., McEnaney B., Rouquerol J., Unger K. (editors). Studies in Surface Science and Catalysis. V. 144. Characterisation of Porous Solids VI. (Amsterdam: Elsevier Science, 2002).
44. Gun'ko V.M. Features of the morphology and texture of silica and carbon adsorbents. Surface. 2021. 13(28): 127. https://doi.org/10.15407/Surface.2021.13.127
45. Gun'ko V.M., Turov V.V., Schur D.V., Zarko V.I., Prykhod'ko G.P., Krupska T.V., Golovan A.P., Skubiszewska-Zięba J., Charmas B., Kartel M.T. Unusual interfacial phenomena at a surface of fullerite and carbon nanotubes. Chem. Phys. 2015. 459: 172. https://doi.org/10.1016/j.chemphys.2015.08.016
46. Kroto H.W., Fischer J.E., Cox D.E. (editors). The Fullerenes. (Oxford: Pergamon Press, 1993).
47. Harris P.J.F. Carbon Nanotube Science. Synthesis, Properties and Applications. (Cambridge: Cambridge University Press, 2009). https://doi.org/10.1017/CBO9780511609701
48. Ravikovitch P.I., Neimark A.V. Density functional theory model of adsorption on amorphous and microporous silica materials. Langmuir. 2006. 22(26): 11171. https://doi.org/10.1021/la0616146
49. Hashim A.A. Smart Nanoparticles Technology. (Rijeka, Croatia: InTech, 2012). https://doi.org/10.5772/1969
50. Rahman M.R. (editor). Fundamentals and Recent Advances in Nanocomposites Based on Polymers and Nanocellulose. (Elsevier, 2021).
51. Barhoum A., Bechelany M., Makhlouf A.S.H. (editors). Handbook of Nanofibers. (Springer, 2019). https://doi.org/10.1007/978-3-319-53655-2
52. Universität Bayreuth. Laboratory for Soft Matter Electron Microscopy. https://www.smem.uni-bayreuth.de/en/gallery-transmission-electron-microscopy/Colloidal-Samples/Microcrystalline-Cellulose/index.html
DOI: https://doi.org/10.15407/hftp15.04.441
Copyright (©) 2024
This work is licensed under a Creative Commons Attribution 4.0 International License.