Chemistry, Physics and Technology of Surface

ISSN 2518-1238 (Online), ISSN 2079-1704 (Print)

In this study, hybrid organosilica coatings on glass substrates were synthesized using mixtures of the active polymer OH-terminated PDMS and one or more precursors, namely methyltrimethoxysilane bis(3-trimethoxysilylpropyl) amine, phenyltrimethoxysilane, cyanopropyltrimethoxysilane, aminopropyltriethoxysilane in the presence of modifiers (polyethylene glycol, organic solvents) and trifluoroacetic acid catalyst. The aim of this work was to obtain new sorption materials for the extraction of nonpolar and semi-polar analytes, for example, carbonyl compounds in the form of PFBHA derivatives, azo dyes, phthalates, and others, and to purify samples with a complex matrix for further gas chromatographic analysis. The advantages of the obtained sorption coatings are the effective separation of micro quantities of target compounds of nonpolar and semi-polar nature from polar compounds present in aqueous samples in rather high concentrations.

The paper describes the synthesis of organosilica coatings of various compositions, the volume ratio of the active polymer, precursors, deactivating agent, catalyst, and modifiers. The coatings were applied to glass substrates using two methods: spin-coating and dip-coating. Sometimes the application was complicated due to uneven distribution of the sol when the solution mixture was too viscous or required a long drying time. Bis(3-trimethoxysilylpropyl) amine and N-(2-aminoethyl)-3-aminopropyltriethoxysilane proved to be effective crosslinking agents with similar properties of the obtained coatings; the addition of these precursors significantly improved the characteristics of the obtained coatings. It has been shown that mixtures containing OH-terminated PDMS form thick coatings (up to 325 μm) without cracks in the presence of most of the studied precursors, and the addition of titanium isopropoxide improves the thermal stability and leads to the formation of a more uniform coating in the case of substrates of complex shape (stir bars).

The IR spectra of the studied coatings were obtained, most of the spectral bands are typical of the PDMS polymer, and the presence of covalently bound titanium in the coatings is confirmed by a peak at 924 cm^–1. All the coatings were hydrophobic, and the contact angles with water were measured, which ranged from 99.7 to 105.6. Thermogravimetric analysis (TG and DTA) was performed to verify the thermal stability of the coatings for further use in solid-phase microextraction with gas chromatography, and it was shown that the coatings could withstand heating up to 350–425 ℃.

For sorption in analytical quantitative methods, it is necessary to use coatings that are homogeneous, uniform, durable, less prone to swelling, and reproducible in synthesis and during sorption. The synthesized coatings are effective for further use in chemical analysis to purify samples from interfering components or for preconcentration of analytes. The coatings have sufficient stability to be used in the hybrid methods of analysis.

1. Kabir A., Furton K.G., Malik A. Innovations in sol-gel microextraction phases for solvent-free sample preparation in analytical chemistry. TrAC, Trends Anal. Chem. 2013. 45: 197. https://doi.org/10.1016/j.trac.2012.11.014

2. Hyötyläinen T., Riekkola M.L. Sorbent- and liquid-phase microextraction techniques and membrane-assisted extraction in combination with gas chromatographic analysis: A review. Anal. Chim. Acta. 2008. 614(1): 27. https://doi.org/10.1016/j.aca.2008.03.003

3. Gilart N., Marcé R.M., Borrull F., Fontanals N. New coatings for stir-bar sorptive extraction of polar emerging organic contaminants. TrAC, Trends Anal. Chem. 2014. 54: 11. https://doi.org/10.1016/j.trac.2013.10.010

4. Es-Haghi A., Hosseini S.M., Khoshhesab Z.M. Development and application of a new solid-phase microextraction fiber by sol-gel technology on titanium wire. Anal. Chim. Acta. 2012. 742: 74. https://doi.org/10.1016/j.aca.2012.04.018

5. Lucena R. Extraction and stirring integrated techniques: Examples and recent advances. Anal. Bioanal. Chem. 2012. 403(8): 2213. https://doi.org/10.1007/s00216-012-5826-9

6. Pérez-Padilla Y., Cetina S.A.M., Ávila-Ortega A., Barrón-Zambrano J.A., Vilchis-Néstor A.R., Carrera-Figueiras C., Rodríguez D.M. Evaluation of Polydimethylsiloxane-Phenylsiloxane as a coating for stir bar sorptive extraction. J. Mex. Chem. Soc. 2018. 62(2): 431. https://doi.org/10.29356/jmcs.v62i2.431

7. Wan Ibrahim W.A., Wan Ismail W.N., Abdul Keyon A.S., Sanagi M.M. Preparation and characterization of a new sol-gel hybrid based tetraethoxysilane-polydimethylsiloxane as a stir bar extraction sorbent materials. J. Sol-Gel Sci. Technol. 2011. 58(3): 60. https://doi.org/10.1007/s10971-011-2434-7

8. Hasan C.K., Ghiasvand A., Lewis T.W., Nesterenko P.N., Paull B. Recent advances in stir-bar sorptive extraction: Coatings, technical improvements, and applications. Anal. Chim. Acta. 2020. 1139: 222. https://doi.org/10.1016/j.aca.2020.08.021

9. Dalod A., Grendal O., Blichfeld A., Furtula V., Pérez J., Henrikse L., Grande T., Einarsrud M.-A. Structure and optical properties of Titania-PDMS hybrid nanocomposites prepared by in situ Non-Aqueous synthesis. Nanomaterials. 2017. 7(12): 460. https://doi.org/10.3390/nano7120460

10. Kim T.Y., Alhooshani K., Kabir A., Fries D.P., Malik A. High pH-resistant, surface-bonded sol-gel titania hybrid organic-inorganic coating for effective on-line hyphenation of capillary microextraction (in-tube solid-phase microextraction) with high-performance liquid chromatography. J. Chromatogr. A. 2004. 1047(2): 165. https://doi.org/10.1016/S0021-9673(04)01027-1

11. Azenha M.A., Nogueira P.J., Silva A.F. Unbreakable Solid-Phase microextraction fibers obtained by Sol−Gel deposition on titanium wire. Anal. Chem. 2006. 78(6): 2071. https://doi.org/10.1021/ac0521246

12. Dulian P., Zajic J., Zukowski W. Effect of titanium source and sol-gel TiO2 thin film formation parameters on its morphology and photocatalytic activity. Mater. Sci. Pol. 2021. 38(3): 424. https://doi.org/10.2478/msp-2020-0056

13. Chong S.L., Wang D., Hayes J.D., Wilhite B.W., Malik A. Sol-Gel Coating Technology for the Preparation of Solid-Phase Microextraction Fibers of Enhanced Thermal Stability. Anal. Chem. 1997. 69(19): 3889. https://doi.org/10.1021/ac9703360

14. Poliquit B.Z., Burn P.L., Shaw P.E. Effect of precursor macromonomer molecular weight on poly(dimethylsiloxane) film morphology and nitroaromatic vapor sorption. Sens. Actuators, B. 2018. 270: 283. https://doi.org/10.1016/j.snb.2018.04.174

15. Zuloaga O., Etxebarria N., González-Gaya B., Olivares M., Prieto A., Usobiaga A. Stir-bar sorptive extraction. (Elsevier, 2020). https://doi.org/10.1016/B978-0-12-816906-3.00018-2

16. Bouteau M., Cantin S., Fichet O., Perrot F., Teyssié D. Contribution toward comprehension of contact angle values on single polydimethylsiloxane and poly(ethylene oxide) polymer networks Langmuir. 2010. 26(22): 17427. https://doi.org/10.1021/la102384s

17. Launer P., Arkles B. Infrared Analysis of Organosilicon Compounds. In: Silicon Compounds: Silanes & Silicones. (Morrisville: Gelest Inc., 2013).

18. Gaudière F., Masson I., Morin-Grognet S., Thoumire O., Vannie, J.-P., Atmani H., Ladam G., Labat B. Mechano-chemical control of cell behaviour by elastomer templates coated with biomimetic Layer-by-Layer nanofilms. Soft Matter. 2012. 8(32): 8327. https://doi.org/10.1039/c2sm25614b

19. Dvornic P.R. Thermal Properties of Polysiloxanes. In: Silicon-Containing Polymers. (Springer, 2000). https://doi.org/10.1007/978-94-011-3939-7_7

20. Dvornic P.R. High-Temperature-Stability-of-Polysiloxanes. In: Silicon Compounds: Silanes & Silicones. (Morrisville: Gelest Inc., 2008).

21. Alexandru M., Cazacu M., Nistor A., Musteat V.E., Stoica I., Grigora C., Simionesc B.C. Polydimethylsiloxane/silica/titania composites prepared by solvent-free sol-gel technique. J. Sol-Gel Sci. Technol. 2010. 56(3): 310. https://doi.org/10.1007/s10971-010-2307-5