Effect of Oxide Fillers on Thermal Destruction of Unsaturated Polyester Resin
Abstract
Effect of fillers on the thermal destruction of unsaturated polyester resin and its compositions with nanoparticles of titania and silica within the temperature interval of 25-800°C has been investigated by the temperature programmed desorption technique with mass-spectrometric registration of destruction products and IR-spectroscopy. Composition of destruction products, decomposition stages, and filling effect with nanoparticles on the resin destruction were determined. The filling effect on the composition and the amount of destruction products as well as the thermal decomposition mechanism were analyzed.References
Hanemann T., Szabó D.V. Polymer nanoparticle composites: From synthesis to modern application // Materials. – 2010. – V. 3, N 6. – P. 3468–3517.
Camargo P.K.C., Satyanarayana K.G., Wypych F. Nanocomposites: synthesis, structure, properties and new application opportunities // Mater. Res. – 2009. – V. 12, N 1. – P. 1–39.
Николаев А.Ф. Синтетические полимеры и пластические массы на их основе. – Москва-Ленинград: Химия, 1964. – 784 с.
Pielchowski K., Njuguna J. Thermal Degradation of Polymeric Materials. – Shawbury: Rapra Technology Limited, 2005. – 306 p.
Kicko-Walczak E. Flame retarded halogenated polyester resins: Thermal decomposition study // J. Polym. Eng. – 2003. – V. 23, N 3. – P. 149–154.
Kicko-Walczak E. Studies on the mechanism of thermal decomposition of unsaturated polyester resins with reduced flammability // Polym. Polym. Compos. – 2004. – V. 12, N 2. – P. 127–134.
Evans S.J., Haines P.J., Skinner G.A. The effect blue glycol, aromatic acid partial structure units of structure on the thermal degradation of polyester resins // Thermochim. Acta. – 1996. – V. 278, N 1–2. – P. 77–90.
Anderson D.A., Freeman E.S. The kinetics of the thermal degradation of the synthetic styrened polyesters // J. Appl. Polym. Sci. – 1959. – V. 1, N 2. – P. 192–199.
Bansal R.J., Mital J., Singh P. Thermal stability and degradation studies of polyester resins // J. Appl. Polym. Sci. – 1989. – V. 37, N 7. – P. 1901–1908.
Kicko-Walczak E. Kinetics of thermal decomposition of unsaturated polyester resins with reduced flammability // J. Appl. Polym. Sci. – 2003. – V. 88, N 13. – P. 2851–2857.
Evans S.J., Haines P.J., Skinner G.A. Тhe thermal degradation of polyester resins. II. The effects of cure and of fillers on degradation // Thermochim. Acta. – 1997. – V. 291, N 1–2. – P. 43–49.
Arii T., Ichihara S., Nakagova H., Fujii N. A kinetic study of the thermal decomposition of polyester by controlled rate thermogravimetry // Thermochim. Acta. – 1998. – V. 319, N 1–2. – P. 139–149.
Wang Ch.-Y.F. Polymer degradation mechanism. Reselection through derivatization for quantitative pyrolisis gas chromatography. Analyses // Anal. Chem. – 1998. – V. 70, N 17. – P. 3642–3648.
Chrissafis K., Autoniatis G., Paraskevopoulos K.M. et al. Comparative study of the effect of different nanoparticles on the mechanical properties and thermal degradation mechanism of in situ prepared poly(caprolaction) nanocomposites // Compos. Sci. Technol. – 2007. – V. 67, N 10. – P. 2165–2174.
Shih Y.-F., Jeng R.-J. Thermal degradation behaviour and kinetic analysis of unsaturated polyester-based composites and IPNS by conventional and modulated thermogravimetric analysis // Polym. Degrad. Stab. – 2006. – V. 91, N 4. – P. 823–831.
Saetiaw K., Atong D., Sricharoenchaikul V., Ahtong D. Thermal decomposition and kinetic study of different types of glass fiber/unsaturated polyester pipe waste // Mater. Sci. Forum. – 2010. – V. 654–656. – P. 2652–2655.
Monfredi L.B., Rodrigues E.S., Vladyka-Przybylak M., Vazques A. Thermal degradation and fire resistance of unsaturated polymer, modified acrylic resins and their compositions with natural fibres // Polym. Degrad. Stab. – 2006. – V. 91, N 2. – P. 255–261.
Kumar M.N.S., Yaakob Z., Sidaramaiah Poly(styrene-co-butyl acrylate) latex-reinforced polyester non woven fabric composites. Thermal and morphological studies // J. Appl. Polym. Sci. – 2009. – V. 114, N 1. – P. 467–474.
Avella M., Bontioli F., Canillo V. et al. Poly(ε-caprolactone) based composites: influence of compatibilization on properties of poly(ε-caprolactone)-silica nanocomposites // Compos. Sci. Technol. – 2006. – V. 66, N 7–8. – P. 886–896.
Caseri W.R. Nanocomposites of polymers and inorganic particles: preparation, structure and properties // Mater. Sci. Technol. – 2006. –V. 22, N 7. – P. 807–817.
Garcia M., Van Vliet G., Jain S. et al. Polypropylene/SiO2 nanocomposites with improved mechanical properties // Rev. Adv. Mater. Sci. – 2004. – V. 6, N 2. – P. 169–175.
Azo O., Eguizabal J.I., Nazabal J. The influence of surface modification on the structure and properties of a nanosilica filled thermoplastic elastomer // Compos. Sci. Technol. – 2007. – V. 67, N 13. – P. 2854–2863.
Gornicka B., Prociow E. Polyester and polyesterimide compounds with nanofillers for impregnation of electrical motors // Acta Phys. Pol. A. – 2009. – V. 115, N 4. – P. 842–845.
Gornicka B., Sieradzka R. Barriers properties of impregnation varnishes with nanosilica // J. Phys. Conf. Ser. – 2009. –V. 146. – doi: 10.1088/1742-6596/146/1/012016
Grassie N., Scott G. Polymer degradation and stabilization. – Cambridge: Cambridge University Press, 1988. – 222 p.
Zhuravlev L.T. Surface characterization of amorphous silica– review of works from the formed USSR // Colloids Surf. A. – 1993. – V. 74, N 1. – P. 71–90.
Горелов Б.М., Мищенко В.Н., Гирченко А.Г. Деструкция карбамидо-формальдегидной смолы, наполненной кремнеземными материалами // Поверхность. – 2009. – № 1(16). – С. 136–146.
Chukin G.D., Malevich V.G. Infrared spectra of silica // J. Appl. Spectrosc. – 1977. – V. 26, N 2. – P. 223–229.
Нейланд О.Я. Органическая химия. – Москва: Высшая школа, 1990. – 751 с.
Downloads
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
