Chemistry, Physics and Technology of Surface, 2017, 8 (4), 400-409.

Synthesis and characterization of copper-loaded hydroxyapatite-alginate microspheres



DOI: https://doi.org/10.15407/hftp08.04.400

A. A. Yanovska, S. B. Bolshanina, A. S. Stanislavov, V. N. Kuznetsov, A. B. Mospan, V. Yu. Illiashenko, Yu. V. Rogulsky, Ya. V. Trofimenko, S. N. Danilchenko

Abstract


Microspheres of hydroxyapatite (HA) in alginate (Alg) shell can be successfully used for controlled release of drugs, growth factors, and antibacterial compounds. Hydroxyapatite is a perfect material for biomaterials production due to its high sorption capacity to metal ions, low solubility in water, high stability to oxidisers and reducers, low cost and biocompatibility. Sodium alginate used for microspheres formation due to its cross-linking capability with divalent cations (Cu2+, Ca2+ etc.). Microspheres  HA/Alg-Cu were obtained by 2 variants of synthesis and showed more rough surface than that of microspheres HA/Alg-Ca what is better for cell proliferation. XRD results show that HA is the main crystalline phase in obtained microspheres. According to the results of adsorption kinetics study, HA has the main contribution in process of Cu2+ ions adsorption. The temperature, increasing the rate of the adsorption process, has negligible effect on the adsorption capacity of HA due to the saturation of energetically heterogeneous active sites on the microspheres surface with Cu2+ ions. Adsorption index of HA/Alg microspheres to Cu2+ ions was calculated to be above 60 mg/g. Adsorption of Cu2+ ions on HA/Alg microspheres has an ion-exchange character. Due to the Cu2+ ions release obtained microspheres showed antibacterial effect on S. aureus and E. coli in concentration 6 mg/mL.


Keywords


hydroxyapatite; alginate; microspheres; composite; adsorption; antibacterial properties; biomaterials

Full Text:

PDF

References


1. Venkatesan J., Bhatnagar I., Manivasagan P., Kang K.-H., Kim S.-K. Alginate composites for bone tissue engineering: A review. Int. J. Biol. Macromol. 2015. 72: 269–281. https://doi.org/10.1016/j.ijbiomac.2014.07.008

2. Perucca O.C., DeGirolamo L., Perteghella S., Stanco D., Chlapanidas T., Vigan M., Torre M.L. Alginate beads as a vehicle for mesenchymal stem cells isolated from adipose tissue and tendon tissue: in vitro evaluation of a new approach for the treatment of tendinopathies. J. Sports Traumatol. 2014. 31: 23.

3. Lee K.Y., Mooney D.J. Alginate: Properties and biomedical applications. Prog. Polym. Sci. 2012. 37(1): 106. https://doi.org/10.1016/j.progpolymsci.2011.06.003

4. George M., Abraham T.E. Polyionic hydrocolloids for the intestinal delivery of protein drugs. J. Control. Release. 2006. 114(1): 1. https://doi.org/10.1016/j.jconrel.2006.04.017

5. Rinaudo M. Biomaterials based on a natural polysaccharide: alginate. TIP. Revista Especializada en Ciencias Químico-Biológicas. 2014. 17(1): 92. https://doi.org/10.1016/S1405-888X(14)70322-5

6. Norajit K., Ryu G.H. Preparation and properties of antibacterial films incorporated extruded white ginseng extract. Journal of Food Processing and Preservation. 2011. 35(4): 387. https://doi.org/10.1111/j.1745-4549.2010.00479.x

7. Kuo C.K., Ma P.X. Ionically crosslinked alginate hydrogels as scaffolds for tissue engineering: part 1. structure, gelation rate and mechanical properties. Biomaterials. 2001. 22(6): 511. https://doi.org/10.1016/S0142-9612(00)00201-5

8. Draget K.I., Taylor C. Chemical, physical and biological properties of alginates and their biomedical implications. Food Hydrocolloids. 2011. 25(2): 251. https://doi.org/10.1016/j.foodhyd.2009.10.007

9. Zhang J., Wang Q., Wang A. In situ generation of sodium alginate/hydroxyapatite nanocomposite beads as drug-controlled release matrices. Acta Biomater. 2010. 6(2): 445. https://doi.org/10.1016/j.actbio.2009.07.001

10. Mizushima Y., Ikoma T., Tanaka J., Hoshi K., Ishihara T., Ogawa Y., Ueno A. Injectable porous hydroxyapatite microparticles as a new carrier for protein and lipophilic drugs. J. Control. Release. 2006. 110(2): 260. https://doi.org/10.1016/j.jconrel.2005.09.051

11. González-Rodríguez M.L., Holgado M.A., Sánchez-Lafuente C., Rabasco A.M., Fini A. Alginate/chitosan particulate systems for diclofenac sodium release. Int. J. Pharm. 2002. 232(1–2): 225. https://doi.org/10.1016/S0378-5173(01)00915-2

12. Pawar S.N., Edgar K.J. Alginate derivatization: A review of chemistry, properties and applications. Biomaterials. 2012. 33(11): 3279. https://doi.org/10.1016/j.biomaterials.2012.01.007

13. Sen T. K., Khoo C. Adsorption characteristics of zinc (Zn2+) from aqueous solution by natural bentonite and kaolin clay minerals: a comparative study. Computational Water, Energy, and Environmental Engineering. 2013. 2: 1. https://doi.org/10.4236/cweee.2013.23B001

14. Bolshannina S.B., Yanovskaya A.A., Kuznetsov V.N., Rogulsky Yu.V., Stanislavov A.S., Ilyashenko V.Yu., Sony A.K. Adsorption of zinc ions by capsules of hydroxyapatite in alginate envelope. Studying kinetics. Chemical Industry of Ukraine. 2016. 2(133): 3.

15. Tolerable upper intake levels for vitamins and minerals. Scientific Committee on Food Scientific Panel on Dietetic Products, Nutrition and Allergies February. (European Food Safety Authority, 2006).




DOI: https://doi.org/10.15407/hftp08.04.400

Copyright (©) 2017 A. A. Yanovska, S. B. Bolshanina, A. S. Stanislavov, V. N. Kuznetsov, A. B. Mospan, V. Yu. Illiashenko, Yu. V. Rogulsky, Ya. V. Trofimenko, S. N. Danilchenko

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.