Titanosilicate Micro/Mesoporous TS-1/MCM-41 Composites

Authors

  • S. V. Gryn Pysarzhevskiy Institute of Physical Chemistry of National Academy of Sciences of Ukraine
  • Z. A. Storchak Taras Shevchenko National University of Kyiv
  • V. M. Levchyk Taras Shevchenko National University of Kyiv
  • S. A. Alekseev Taras Shevchenko National University of Kyiv
  • P. S. Yaremov Pysarzhevskiy Institute of Physical Chemistry of National Academy of Sciences of Ukraine
  • V. G. Ilyin Pysarzhevskiy Institute of Physical Chemistry of National Academy of Sciences of Ukraine

Abstract

Micro/mesoporous titanosilicate composites were synthesized by incorporation of TS-1 sol nanoparticles into the MCM-41 structure during the template synthesis process. Their structural and sorption parameters were determined as well as the catalytic activity in liquid phase cyclohexane oxidation by H2O2.

References

Li J., Zhou C., Xie H. et al. Titanium-containing mesoporous materials: synthesis and application in selective catalytic oxidation // J. Nat. Gas Chem. – 2006. – V. 15, N 3. – P. 164–177.

Galacho C., Ribeiro Carrott M.M.L., Carrott P.J.M. Structural and catalytic properties of Ti–MCM-41 synthesised at room temperature up to high Ti content // Microporous Mesoporous Mater. – 2007. – V. 100. – P. 312–321.

Eimer G.A., Casuscelli S.G., Ghione G.E. et al. Synthesis, characterization and selective oxidation properties of Ti-containing mesoporous catalysts // Appl. Catal. A. – 2006. – V. 298. – P. 232–242.

Popova M., Szegedi A., Nemeth P. et al. Titanium modified MCM-41 as a catalyst for toluene oxidation // Catal. Commun. – 2008. – V. 10, N 3. – P. 304–308.

Balu A.M., Hidalgo J.M., Campelo J.M. et al. Microwave oxidation of alkenes and alcohols using highly active and stable mesoporous organotitanium silicates // J. Mol. Catal. A. – 2008. – V. 293. – P. 17–24.

Chica A., Corma A., Domine M.E. Catalytic oxidative desulfurization (ODS) of diesel fuel on a continuous fixed-bed reactor // J. Catal. – 2006. – V. 242, N 2. – P. 299–308.

Trong On D., Lutic D., Kaliaguine S. An example of mesostructured zeolitic material: UL-TS-1 // Microporous Mesoporous Mater. – 2001. – V. 44–45. – P. 435–444.

Campos A.A., Dimitrov L., da Silva C.R. et al. Recrystallisation of mesoporous SBA-15 into microporous ZSM-5 // Microporous Meso­porous Mater. – 2006. – V. 95. – P. 92–103.

Huang Q., Vinh-Thang H., Malecian A. et al. Adsorption of n-heptane, toluene and o-xylene on mesoporous UL-ZSM5 materials // Microporous Mesoporous Mater. – 2006. – V. 87, N 3. – P. 224–234.

Jin C., Li G., Wang X. et al. A titanium containing micro/mesoporous composite and its catalytic performance in oxidative desulfurization // Microporous Mesoporous Mater. – 2008. – V. 111. – P. 236–242.

Robson H., Lillerud K.P. Verified Synthesis of Zeolitic Materials. – Elsevier, 2001. – 272 p.

Бобонич Ф.М., Коваленко А.С., Волошина Ю.Г. и др. Особенности молекулярной сорбции на темплатсодержащих мезопористых молекулярных ситах типа МСМ-41 // Теорет. эксперим. химия. – 1999. – Т. 35, № 6. – C. 367–372.

Бабко А.К., Пятницкий И.В. Количественный анализ. – Москва: Высшая школа, 1968. – 495 с.

Грег С., Синг К. Адсорбция, удельная поверхность, пористость. – Москва: Мир, 1984. – 306 с.

Torres I.C., Cardoso D. The influence of gel alkalinity in the synthesis and physicochemical properties of the zeolite [Ti,Al]-Beta // Microporous Mesoporous Mater. – 2008. – V. 113. – P. 204–211.

Downloads

How to Cite

GRYN, S. V.; STORCHAK, Z. A.; LEVCHYK, V. M.; ALEKSEEV, S. A.; YAREMOV, P. S.; ILYIN, V. G. Titanosilicate Micro/Mesoporous TS-1/MCM-41 Composites. Chemistry, Physics and Technology of Surface, [S. l.], v. 1, n. 4, p. 415–422, 2010. Disponível em: https://cpts.com.ua/index.php/cpts/article/view/58. Acesso em: 14 jul. 2025.

Issue

Vol. 1 No. 4 (2010): Chemistry, Physics and Technology of Surface / Himia, Fizika ta Tehnologia Poverhni

Section

Articles

License

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.